Free CEM Test Energy Accounting and Economics Questions and Answers — Questions and Answers
Question 1: An industrial facility is billed for both energy consumption (kWh) and peak demand (kW). Which of the following strategies would be most effective in specifically reducing the demand charge component of the utility bill?
- Replacing all standard motors with high-efficiency motors.
- Shifting the operation of a large, non-critical process from mid-afternoon to late at night. (Correct answer)
- Installing a more efficient HVAC system with a higher SEER rating.
- Upgrading the facility's lighting to LEDs.
Correct answer: Shifting the operation of a large, non-critical process from mid-afternoon to late at night.
Demand charges are based on the highest rate of electricity usage during a billing period, often measured in a 15-minute interval. [37, 40] Shifting large electrical loads to off-peak hours reduces the maximum simultaneous power draw, directly lowering the peak demand (kW) that the utility company records. [1] While the other options improve overall energy efficiency and reduce kWh consumption, they may not significantly impact the short-term peak demand if all equipment still operates simultaneously.
Question 2: A company is evaluating an energy efficiency project with a high initial cost but significant annual savings. Which financial metric is defined as the discount rate at which the net present value (NPV) of all cash flows (both positive and negative) from the project equals zero?
- Simple Payback Period (SPP)
- Return on Investment (ROI)
- Internal Rate of Return (IRR) (Correct answer)
- Life-Cycle Cost (LCC)
Correct answer: Internal Rate of Return (IRR)
The Internal Rate of Return (IRR) is the specific discount rate that makes the present value of all future cash savings equal to the initial investment, resulting in an NPV of zero. [4, 29] It represents the annualized effective compounded return rate of an investment. A project is generally considered acceptable if its IRR is greater than the company's required rate of return or cost of capital. [13]
Question 3: When performing a Life-Cycle Cost Analysis (LCCA) for a new chiller system, which of the following costs would NOT be included?
- Initial purchase and installation cost.
- Annual electricity and water consumption costs.
- The cost of a previously conducted energy audit that identified the need for a new chiller. (Correct answer)
- Disposal and decommissioning costs at the end of the chiller's useful life.
Correct answer: The cost of a previously conducted energy audit that identified the need for a new chiller.
Life-Cycle Cost Analysis (LCCA) includes all costs associated with acquiring, owning, operating, and disposing of a system or component. [3, 39] This encompasses the initial investment, energy costs, maintenance, and end-of-life expenses. [27] A previously conducted energy audit is considered a 'sunk cost'—an expense that has already been incurred and cannot be recovered—and is therefore not included in the LCCA of the future project alternatives.
Question 4: An energy manager is comparing two lighting retrofit projects. Project A has a Simple Payback Period of 2.5 years. Project B has a Simple Payback Period of 3.0 years. Why might Project B still be the better long-term financial choice?
- Because a longer payback period always indicates higher quality equipment.
- Because Project B's equipment has a much longer useful life and lower annual maintenance costs. (Correct answer)
- Because Simple Payback Period is the most comprehensive financial metric.
- Because Project A must have a lower initial investment.
Correct answer: Because Project B's equipment has a much longer useful life and lower annual maintenance costs.
Simple Payback Period (SPP) only calculates the time required to recoup the initial investment and ignores cash flows after the payback period, the time value of money, and equipment lifespan. [7, 12] Project B, despite its longer payback, could generate significantly more savings over its entire life if it lasts much longer and requires less maintenance than Project A, making it a better long-term investment. This is why more comprehensive metrics like LCCA or NPV are often preferred.
Question 5: The concept of the 'time value of money' is fundamental to energy economics. It is based on which of the following core principles?
- The cost of energy will always increase over time due to inflation.
- A dollar received today is worth more than a dollar received in the future. (Correct answer)
- All energy conservation measures have a positive return on investment.
- Depreciation of equipment must be calculated on a straight-line basis.
Correct answer: A dollar received today is worth more than a dollar received in the future.
The time value of money is the principle that money available at the present time is worth more than the same amount in the future due to its potential earning capacity. [32, 25] This core concept is used in financial calculations like Net Present Value (NPV) and Life-Cycle Cost Analysis to discount future cash flows to their present-day value, allowing for a fair comparison of investments over different time horizons. [24]
Question 6: A project's Net Present Value (NPV) is calculated to be greater than zero. What does this indicate about the investment?
- The project's rate of return is exactly equal to the discount rate.
- The investment will not be profitable and should be rejected.
- The present value of the expected cash savings is less than the initial investment.
- The project is expected to be profitable and exceed the minimum required rate of return. (Correct answer)
Correct answer: The project is expected to be profitable and exceed the minimum required rate of return.
A positive Net Present Value (NPV) signifies that the present value of the projected future cash inflows (savings) from an investment, discounted at the required rate of return, is greater than the present value of the cash outflows (the initial investment). [23, 36] Therefore, the project is considered economically feasible and is expected to generate returns in excess of the discount rate. [11]
Free CEM Test Energy Accounting and Economics Questions and Answers
An industrial facility is billed for both energy consumption (kWh) and peak demand (kW).
Which of the following strategies would be most effective in specifically reducing the demand charge component of the utility bill?
What Practice Test Geeks adds beyond an AI chat for CEM
An AI chatbot can quiz you, but it can't reproduce the exam conditions or keep your record. Here you get:
- A timed, full-length CEM mock exam — 130 questions in 240 minutes with a 68% pass mark, modeled on the official exam's question count and time limit, followed by a score report broken down by exam domain.
- A fixed CEM question bank: the same test every attempt, so your score is comparable from one try to the next instead of changing with every regenerated quiz.
- Progress saved on your device: completed tests, scores and missed questions stay in My Progress, so you can retake only what you got wrong.
- A printable CEM cheat sheet you can print or save as a PDF.
- CEM flashcards built from the same question bank.