Woodworking Safety Rules: Free Q&A

Where should the user stand when using the table saw?

To the left of the blade at least 3'

Just across from the blade

Depending on whether the cut has been finished, slightly to the left or right of the blade.

None of the above

Correct! Wrong!

When should all table saw adjustments be made?

As soon as the saw has totally stopped.

Your choice of blade will affect this.

After the table's fencing has been taken down.

As the saw is running

Correct! Wrong!

It is necessary to use a push stick while ripping a board on a table saw if the rip cut is less than:

4 inches

12 inches

10 inches

6 inches

Correct! Wrong!

As you use the chop saw, be sure to:

You always make sure there is at least one square face and edge.

Do not attempt to cut too quickly; instead, let the blade do the work.

Between the board and the fence, there is no gap.

All of the above

Correct! Wrong!

When operating the drill press, you must:

As the chuck key is put into the chuck, turn the machine on.

Before using, use the chuck key to tighten the pieces.

Only use your hands to tighten the bits in the chuck.

All of the above

Correct! Wrong!

Which outfit is inappropriate for a shop?

Tool apron

Fit clothes

Protective eyewear

Slippers

Correct! Wrong!

How high above your material should you set a table saw blade?

2"

Greater than 1"

Roughly 1/4"

Around 1 to 2"

Correct! Wrong!

FREE Woodworking Safety Rules Questions and Answers

Where should the user stand when using the table saw?

When should all table saw adjustments be made?

It is necessary to use a push stick while ripping a board on a table saw if the rip cut is less than:

As you use the chop saw, be sure to:

When operating the drill press, you must:

Which outfit is inappropriate for a shop?

How high above your material should you set a table saw blade?

Related Post