Free STSC Health Hazards and Hygiene Questions and Answers 1 — Questions and Answers
Question 1: A worker on a demolition project is experiencing confusion, slurred speech, and has hot, dry skin. The supervisor suspects a heat-related illness. Which condition is most likely, and what is the most critical immediate action?
- Heat exhaustion; move the worker to a cool area and provide water.
- Heat cramps; have the worker gently stretch the affected muscles.
- Heat stroke; call 911 immediately and begin cooling the worker. (Correct answer)
- Heat rash; apply a soothing lotion and allow the skin to air dry.
Correct answer: Heat stroke; call 911 immediately and begin cooling the worker.
The symptoms of confusion, slurred speech, and hot, dry skin are classic signs of heat stroke, which is a life-threatening medical emergency. The priority is to call for professional medical help (911) and immediately start cooling the person's body to prevent severe damage to vital organs.
Question 2: According to OSHA standard 29 CFR 1926.62, which of the following triggers the requirement for an employer to implement specific compliance activities, such as periodic air monitoring and medical surveillance, for lead exposure?
- Any detectable level of lead on the worksite.
- When employee exposure meets or exceeds the Permissible Exposure Limit (PEL) of 50 µg/m³.
- When employee exposure meets or exceeds the Action Level (AL) of 30 µg/m³. (Correct answer)
- Only when an employee shows physical symptoms of lead poisoning.
Correct answer: When employee exposure meets or exceeds the Action Level (AL) of 30 µg/m³.
OSHA's standard for lead in construction (29 CFR 1926.62) establishes an Action Level (AL) of 30 µg/m³ as an 8-hour time-weighted average. Reaching or exceeding this level, even if it is below the Permissible Exposure Limit (PEL), requires the employer to initiate actions like air monitoring and medical surveillance to protect workers.
Question 3: A supervisor is setting up a new construction site that will have 35 employees working during the main shift. According to OSHA standard 1926.51, what is the minimum number of toilet facilities required?
- 1 toilet
- 2 toilets (Correct answer)
- 1 toilet seat and 1 urinal
- 3 toilets
Correct answer: 2 toilets
OSHA's sanitation standard for construction, 1926.51(c), requires one toilet for the first 20 or fewer workers. For 21 to 200 workers, the standard requires 1 toilet seat and 1 urinal per 40 workers. Since 35 workers falls between 21 and 40, one toilet and one urinal would be compliant, but the minimum number of *facilities* is determined by the ratio. With 35 workers, you need facilities for the first 20 (1 toilet) and then the next 15, which falls into the next tier, requiring a second facility. Therefore, 2 toilets are the minimum requirement.
Question 4: During an asbestos abatement project, which of the following is a critical engineering control used to prevent the spread of asbestos fibers outside the work area?
- Requiring all workers to wear N-100 respirators.
- Wetting the asbestos-containing material (ACM) during removal.
- Establishing a negative air pressure enclosure with HEPA filtration. (Correct answer)
- Double-bagging all asbestos waste in clearly labeled disposal bags.
Correct answer: Establishing a negative air pressure enclosure with HEPA filtration.
While respirators (PPE), wetting materials (work practice), and proper bagging (disposal) are all crucial parts of asbestos abatement, the primary engineering control to contain the hazard is the use of a negative air pressure enclosure. This system uses HEPA-filtered machines to ensure that air flows into the work area, not out, preventing contaminated airborne fibers from escaping and contaminating other parts of the building.
Question 5: Which of the following is a key component of a basic hygiene program on a construction site to prevent the spread of infectious diseases?
- Providing hand sanitizer as the primary means for hand cleaning.
- Encouraging workers to share tools to build team cohesion.
- Providing accessible handwashing stations with soap and clean water. (Correct answer)
- Scheduling sanitation facilities to be cleaned on a monthly basis.
Correct answer: Providing accessible handwashing stations with soap and clean water.
The most fundamental aspect of hygiene to prevent disease spread is frequent and thorough handwashing. OSHA and general health guidelines mandate that employers provide handwashing facilities with soap and clean water, especially near toilet facilities and where workers are exposed to contaminants. Hand sanitizer is a supplement, not a replacement, for washing with soap and water.
Question 6: OSHA's standard for respirable crystalline silica in construction (1926.1153) established a new, lower Permissible Exposure Limit (PEL). What is the 8-hour time-weighted average (TWA) PEL for respirable crystalline silica?
- 25 micrograms per cubic meter (µg/m³)
- 100 micrograms per cubic meter (µg/m³)
- 250 micrograms per cubic meter (µg/m³)
- 50 micrograms per cubic meter (µg/m³) (Correct answer)
Correct answer: 50 micrograms per cubic meter (µg/m³)
The current OSHA standard, 1926.1153, significantly reduced the Permissible Exposure Limit (PEL) for respirable crystalline silica to 50 micrograms per cubic meter of air (50 µg/m³), averaged over an 8-hour shift. The standard also established an action level of 25 µg/m³.
Free STSC Health Hazards and Hygiene Questions and Answers 1
A worker on a demolition project is experiencing confusion, slurred speech, and has hot, dry skin.
The supervisor suspects a heat-related illness.
Which condition is most likely, and what is the most critical immediate action?
What Practice Test Geeks adds beyond an AI chat for STSC
An AI chatbot can quiz you, but it can't reproduce the exam conditions or keep your record. Here you get:
- A timed, full-length STSC mock exam — 100 questions in 120 minutes with a 70% pass mark, modeled on the official exam's question count and time limit, followed by a score report broken down by exam domain.
- A fixed STSC question bank: the same test every attempt, so your score is comparable from one try to the next instead of changing with every regenerated quiz.
- Progress saved on your device: completed tests, scores and missed questions stay in My Progress, so you can retake only what you got wrong.
- A printable STSC cheat sheet you can print or save as a PDF.
- STSC flashcards built from the same question bank.