FREE FCTC Knowledge Q&A - Expert Answers and Tips!

A belt will typically share two or more pulleys. A mechanical advantage is achieved if the pitch diameters of the pulleys vary. only depends on pitch diameter, not the tooth ratio like with gears and sprockets.

Class 3 Levers

Lever Definitions

Gear Train, or Commonly Called "transmission"

Belt and Pulley Systems

Correct! Wrong!

- Go through one to four essays.
- 35 questions in total (including the essay questions at the rear of the test booklet);
- only the essay packet may be marked up with notes.
- In the first 30 minutes, 15 to 20 questions based on these writings were distributed.

Gear Train, or commonly called "Transmission"

Recall and Comprehend Technical Information

Belt and Pulley Systems

Recall and Comprehend Verbal and Visual Information:

Correct! Wrong!

How many gallons will a tank with a 12' diameter hold if it is 4' deep if a tank with a 12' diameter holds 670 gallons per foot of depth?

2,680

2,280

2,430

3,040

Correct! Wrong!

Class 1, Class 2, Class 3 are?

Belt and Pulley Systems

Classes of Levers

First Class Lever

Lever Definitions

Correct! Wrong!

Class 1 Levers - Effort in the middle, with the fulcrum on the other side from where the resistance resides. Always less than 1, for example: a pair of tweezers, a human mandible.

False

True

Correct! Wrong!

What's the total volume of a cylinder with a 3' radius and a height of 7'?

197.82 cubic feet

188.52 cubic feet

197.82 square feet

188.52 square feet

Correct! Wrong!

1 vertical foot = 0.433 psi
1 psi = 2.31 vertical feet

Calculating the head pressure difference between an intake and an output using a formula

Speed, torque, and power in relation to one another:

The gear train, also known as the "transmission,"

None of the above

Correct! Wrong!

FREE FCTC Knowledge Question and Answers

A belt will typically share two or more pulleys. A mechanical advantage is achieved if the pitch diameters of the pulleys vary. only depends on pitch diameter, not the tooth ratio like with gears and sprockets.

- Go through one to four essays.
- 35 questions in total (including the essay questions at the rear of the test booklet);
- only the essay packet may be marked up with notes.
- In the first 30 minutes, 15 to 20 questions based on these writings were distributed.

How many gallons will a tank with a 12' diameter hold if it is 4' deep if a tank with a 12' diameter holds 670 gallons per foot of depth?

Class 1, Class 2, Class 3 are?

Class 1 Levers - Effort in the middle, with the fulcrum on the other side from where the resistance resides. Always less than 1, for example: a pair of tweezers, a human mandible.

What's the total volume of a cylinder with a 3' radius and a height of 7'?

1 vertical foot = 0.433 psi
1 psi = 2.31 vertical feet

FREE FCTC Numerical Reasoning Question and Answers

FREE FCTC Verbal Reasoning Question and Answers

A belt will typically share two or more pulleys. A mechanical advantage is achieved if the pitch diameters of the pulleys vary. only depends on pitch diameter, not the tooth ratio like with gears and sprockets.

- Go through one to four essays. - 35 questions in total (including the essay questions at the rear of the test booklet); - only the essay packet may be marked up with notes. - In the first 30 minutes, 15 to 20 questions based on these writings were distributed.

How many gallons will a tank with a 12' diameter hold if it is 4' deep if a tank with a 12' diameter holds 670 gallons per foot of depth?

Class 1, Class 2, Class 3 are?

Class 1 Levers - Effort in the middle, with the fulcrum on the other side from where the resistance resides. Always less than 1, for example: a pair of tweezers, a human mandible.

What's the total volume of a cylinder with a 3' radius and a height of 7'?

1 vertical foot = 0.433 psi 1 psi = 2.31 vertical feet

Premium Tests $49/moFREE November-2024

- Go through one to four essays.
- 35 questions in total (including the essay questions at the rear of the test booklet);
- only the essay packet may be marked up with notes.
- In the first 30 minutes, 15 to 20 questions based on these writings were distributed.

1 vertical foot = 0.433 psi
1 psi = 2.31 vertical feet

Premium Tests $49/mo
FREE November-2024