Line maintenance, which is performed daily or, at most, once per week, is also known as routine maintenance. Line maintenance requires less time and labor than major maintenance.
The International Civil Aviation Organization is referred to as ICAO. The ICAO serves as a governing body for the aviation regulatory bodies in various parts of the world and specifies global air navigation techniques.
The more labor-intensive checks might take up to 8 weeks to finish and demand a huge quantity of manpower. They also take up the greatest area among all maintenance checks, hence they must be carried out at an appropriate MRO location.
Line maintenance, in contrast to base maintenance, doesn't need a sizable area like an MRO facility. Quick turnaround times are provided by line maintenance, which also guarantees on-time aircraft departure.
The pilot in charge of an aircraft is responsible for inspecting the aircraft's airworthiness certificate, maintenance logs, and other pertinent documentation. The pilot also examines the aircraft before takeoff to look for external damage.
The Continuous Airworthiness Maintenance Program is referred to as CAMP. A comprehensive and routine inspection of an aircraft are both parts of this program. A similar program is followed and planned by all commercial aircraft operators.
Pilots must conduct their own pre-flight inspection afterward. The pre-flight inspection is conducted after the pilot walks around the aircraft to visually inspect each component on a checklist for general condition.
The term AMP stands for Aircraft Maintenance Program. It is a document that outlines the necessary maintenance procedures and ensures the ongoing airworthiness of an aircraft.
The largest of all maintenance checks, a D-check is also known as a Heavy Maintenance Visit. D-checks involve a significant amount of effort and can take up to 40,000 man hours to complete.
Every five to six years, an aircraft must undergo the D-check, which is the most thorough inspection. The entire aircraft is essentially disassembled during a D-check for inspection and maintenance. It could take up to 8 weeks to finish such a check.
The engineer's work is significantly impacted by the weather, time, and quantity of ground personnel when performing line maintenance.
The airplane is refueled and all vital instruments are inspected for problems during the 45-minute line maintenance work.
It is expected of the pilots to perform their own preflight inspection. In order to ensure that the aircraft is airworthy, the pilot also conducts an exterior inspection. An essential component of line maintenance is this check.
The engineering team checks the SRM (Structure Repair Manual) for acceptable deficiencies in the area in question with the help of the line maintenance MRO.
The airplane is refueled and all vital instruments are inspected for faults during line maintenance, a 45-minute operation.
A maintenance release may also be referred to as a certificate of release to service (CRS). The maintenance release, which is signed by a representative of the national airworthiness authority, certifies that the aircraft is airworthy and is ready for release from maintenance.
