Fire Guard Responsibilities Flashcards
7 cards from real F60 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Fire Guard Responsibilities flashcards as text
What is the fire guard's responsibility regarding the torch operator's behavior during operations?
Answer: To monitor the operator and stop work if unsafe practices are observed
The fire guard has authority to stop operations if the torch operator engages in unsafe practices that create an unacceptable fire risk.
When torch operations are conducted in a shaft or enclosed space, what additional precaution must the fire guard take?
Answer: Monitor all levels above and below the work area for signs of fire spread
In shafts and enclosed spaces, heat and sparks can travel vertically through penetrations, so the fire guard must monitor all adjacent levels.
A fire guard notices a gas leak near the torch work area before operations begin. The correct response is:
Answer: Prohibit all torch operations until the gas leak is identified and repaired
A gas leak in or near the work area is an immediate prohibition on torch operations until the leak is fully repaired and the area is cleared.
When torch operations occur on a floor where other workers or tenants are present, the fire guard must:
Answer: Alert building occupants in the immediate work area and ensure they are clear of the hot work zone
Building occupants in the immediate work area must be notified and cleared from the hot work zone before torch operations begin.
Which condition would allow a fire guard to reduce the post-operation fire watch period below 1 hour?
Answer: No condition permits a reduction; 1 hour is always required
The minimum 1-hour post-operation fire watch is required by code regardless of automatic suppression systems or written authorizations.
If torch operations must continue into a second shift, what is required for fire guard coverage?
Answer: A qualified fire guard holding a valid F-60 certificate must be on duty for the entire duration of each shift
A certified F-60 fire guard must be present for the entire duration of any shift during which torch operations are performed.
A fire guard discovers that a ceiling tile directly above the torch work area is made of combustible material. The correct action before operations begin is:
Answer: Remove or protect the combustible ceiling tile before allowing torch operations to start
Combustible materials in the fire exposure zone must be removed or protected with fire-resistant shielding before any torch operation begins.