Sheet Metal Design Flashcards
7 cards from real CSWP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Sheet Metal Design flashcards as text
What does the K-Factor represent in SolidWorks sheet metal design?
Answer: The ratio of the neutral axis location to the material thickness
The K-Factor is the ratio of the neutral axis distance (from the inner bend surface) to the total material thickness, used to calculate accurate flat pattern dimensions.
Which SolidWorks sheet metal feature creates the first and foundational geometry of a sheet metal part?
Answer: Base Flange/Tab
The Base Flange/Tab feature creates the initial sheet metal body from a sketch, establishing the starting geometry for all subsequent sheet metal features.
What does the Flat Pattern feature in SolidWorks sheet metal represent?
Answer: The unfolded 2D layout of the formed part showing cut shape before bending
The Flat Pattern is the unfolded 2D representation of the sheet metal part showing the actual shape to be cut from flat stock prior to forming.
In SolidWorks sheet metal, what is Bend Allowance?
Answer: The arc length of material consumed within the bend zone
Bend Allowance is the arc length of material in the bend zone that is used when calculating the flat pattern stretched length of the part.
Which SolidWorks sheet metal feature creates continuous flanges that transition at mitered corners?
Answer: Miter Flange
The Miter Flange feature creates a series of flanges along multiple edges with automatically mitered corners, producing a clean fit at angle transitions.
What is the primary purpose of Relief cuts in sheet metal bend design?
Answer: To prevent tearing or distortion of material at the ends of a flange
Relief cuts are added at flange terminations to prevent the material from tearing or puckering when the sheet is bent into its final form.
Which SolidWorks commands allow you to selectively open specific bends to add features on flat faces, then re-close them?
Answer: Unfold / Fold
The Unfold and Fold commands let you selectively unbend specific bend zones, add features to the now-flat face, and then fold the part back to its formed state.