Flagging Procedures Flashcards
7 cards from real CA FLAGGER practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Flagging Procedures flashcards as text
Which of the following is the correct sequence for releasing traffic through a one-lane work zone?
Answer: Release vehicles in controlled groups after confirming the lane is clear
Vehicles should be released in controlled groups only after the flagger confirms the opposing lane is clear, preventing head-on conflicts in the work zone.
A flagger must communicate with a flagger 1,500 feet away. What is the PREFERRED method?
Answer: Two-way radio communication
Two-way radios are the preferred and most reliable communication method between flaggers separated by distances where visual signals alone are insufficient.
What does it mean when a flagger faces away from traffic and slowly waves the flag overhead in a sweeping motion?
Answer: Traffic should proceed at reduced speed
Facing away from traffic and performing an overhead sweeping wave is the signal for vehicles to proceed slowly through the work zone.
How should a flagger handle a driver who appears confused or uncertain at a flagger station?
Answer: Make eye contact and use clear, deliberate, exaggerated signals
Making eye contact and using clear, deliberate signals helps confused drivers understand the required action without creating additional hazards.
California's Manual on Uniform Traffic Control Devices (CA MUTCD) governs flagging operations. What is its primary purpose?
Answer: To establish uniform standards for traffic control devices and operations on public roads
The CA MUTCD establishes uniform standards for all traffic control devices and procedures on California public roads, including flagging operations.
What is the proper flag-holding technique when a flagger is in the STOP position using a flag (not a paddle)?
Answer: Extend the flag across the road horizontally with the staff vertical
When stopping traffic with a flag, the flagger faces traffic and extends the flag horizontally across the road to create a clear visual barrier.
At what point in a flagging cycle is the risk of a rear-end collision HIGHEST for waiting vehicles?
Answer: When a large queue has built up and traffic is stopped
Long queues of stopped vehicles are at greatest rear-end collision risk because late-arriving drivers may not see the stopped traffic in time to brake.