FREE Basics of Piping Questions and Answers
Which of the following does not correspond to a flange facing classification?
"WNRF" refers to Weld Neck Raised Face, a type of flange in flange classifications based on flange face. As a result, it is false to say that "WNRF" is not a flange classification based on flange facing. The raised face of WNRF flanges acts as a sealing surface when two flanges are connected.
When two flanges are connected with a gasket, the raised surface surrounding the bolt holes of the flange aids in producing a smooth, level, and correctly aligned sealing surface. This feature is known as a "Raised Face" in WNRF. Male and Female (M&F), Ring Type Joint (RTJ), and Flat Face (FF) are other typical flange facing categories. Each has a distinct function in a variety of applications.
Which kind of 90-degree elbow is most frequently utilized in plumbing
A 90-degree elbow is a popular fitting in plumbing systems that is used to reverse the direction of the pipework by 90 degrees. An elbow with a lengthy radius, or one whose radius of curvature is three times the normal pipe diameter, is referred to as a "3D elbow" in most cases. Compared to elbows with short radius, those with a long radius design offer reduced frictional resistance and a smoother fluid flow.
What does isometric indicates' cloud marking mean?
"Cloud marking" refers to the process of highlighting regions on piping and instrumentation diagrams (P&ID) or isometric drawings where changes have occurred during revision or updating. Engineers or drafters may utilize cloud markings to encircle or surround the exact area of the drawing that has been modified when there is a design update or revision.
These cloud markings usually consist of an oval or circle-like form with an associated number or identification. This makes it easier for people to recognize and comprehend the changes made during a specific revision by attracting attention to the altered portion of the drawing. Throughout the design and revision process, cloud markings are frequently used in technical drawings to enhance communication and clarity.
Another name for a non-return valve is?
A non-return valve is also frequently referred to as a "check valve." A "check valve" is a valve that only permits one direction of fluid flow while blocking backflow. Therefore, "non-return valve" and "check valve" refer to the same kind of valve, where fluid flow is allowed in one direction but blocked in the other.
In a plumbing system, a valve is used for:
In a piping system, a valve is in fact utilized for pressure adjustment, flow control, and flow isolation.
Which material is most frequently used for gaskets?
It's noteworthy that the health and environmental risks linked with asbestos exposure have led to a dramatic decrease in the usage of asbestos in gaskets. Since asbestos is known to cause cancer, many nations have restricted or outright forbidden its usage. Various materials that have good sealing qualities without the health dangers connected with asbestos are routinely used to make modern gaskets.
What grade of stainless steel is known as acid proof steel?
AISI 316 is a type of austenitic stainless steel that contains chromium, nickel, and molybdenum, offering good corrosion resistance, especially in acidic settings. It is frequently referred to as "acid-proof steel" or "acid-resistant steel." Chemical processing and maritime engineering are just two of the industries that can benefit from the widespread usage of AISI 316, which is ideal for applications where resistance to corrosion from acids or chemicals is crucial.