FREE Bachelor of Computer Engineering Microprocessor Questions and Answers
The instruction MOV AX,[BX] represents which of the following addressing methods?
The address of the operand is saved in the register when using indirect register addressing. The instruction represents the register indirect addressing mode since it specifies that the register used to refer to the address is accessed indirectly.
What statement concerning microprocessors is correct?
Neither memory nor interface circuitry are present in microprocessors. They adhere to Princeton architecture and house registers, ALUs, and CUs.
How many words can an 8-bit CPU process?
An 8-bit CPU can handle 8 bits of data at once. The word length may vary from 4 to 64 bits depending on the type of microcomputer.
Any information can be processed by a computer's microprocessor if it is only present in .
The microprocessor can't use information if it isn't stored in the computer's main memory. Data is kept in the primary storage region of a computer, commonly referred to as main storage or memory, for quick access by the CPU. Primary or main storage is commonly referred to as memory or random-access memory (RAM).
Which of the following describes a RST 7.5 interrupt's characteristics?
A maskable interrupt with the second-highest priority after RST-4.5 is RST 7.5. Only the edge-triggered signal is used. The interrupt's vectored address is 003C H, and it is a vectored interrupt.
The _______ directive tells the assembler to start allocating memory for a segment, block, or piece of code at the specified address.
The location counter is started by the assembler when an ORG is written to maintain track of the module's designated address as stated in the directive. 0000H is used as the initial value for the location counter if the directive is absent.
What form of computer hardware is a microprocessor?
They come in three categories: EPIC stands for explicitly parallel instruction computing. CISC stands for complex instruction set computer.
Which of the following statements regarding the address bus is false?
Although the address bus on a microprocessor is unidirectional, the data bus is bidirectional. The address lines AD0 through AD7 can serve as both address and data bus lines.
Among the following, which one is not a microprocessor?
Microprocessors like the Z8000, Motorola 6809, and Zilog Z8 are 8-bit microcontrollers like the PIC1x.
What is a Microprocessor?
A multipurpose PLD called a microprocessor accepts binary data as input, processes the data in accordance with the commands, and outputs the processed data. From memory, binary instructions are read.
Which of the following does not apply to the microprocessor's TRAP interrupt?
The TRAP interrupt, which has the greatest priority of all the interrupts, uses both level and edge-triggered clock in the 8085 microprocessor.
Intel created its first 8-bit microprocessor using which of the following technologies?
Because PMOS technology was sluggish but straightforward, it was chosen to construct the CPU.
Which of the following describes a microprocessor's special-purpose register?
Program counter, which carries the address of the following instruction, is a special-purpose register as opposed to instruction register, accumulator, and temporary register, which are general-purpose registers.
Which of the following describes how a microprocessor should operate?
The opcode is initially fetched from memory, followed by memory read and write operations, I/O read operations, and I/O write operations.
How many opcodes are there in an 8-bit processor?
The most number of opcodes that an 8-bit CPU may support is 28, or 256. However, there are only 246 opcodes in it.
What statement concerning the 8086 microprocessor is true?
The first x86 processor from Intel is the 8086. In 1978, they introduced the 8086 CPU, which was the most potent processor in terms of advanced architecture. It can address more memory and has a strong instruction set.